You are here: Products » Analytical - Liquids » Water Analysers » Sigirst AquaMaster

Sigrist AquaMaster Multi-Parameter Measuring System

Sigirst AquaMaster
     
Sigrst AquaMaster Data Sheet  Sigrst AquaMaster Data Sheet

Multi-Parameter Measuring System for Water Treatment Works

- Compact, modular complete system

- Unrestricted parameter combination

- Central, integrated control unit with colour touch screen

- Strong, reliable brand names: SIGRIST & HAMILTON

- One contact for all measurements

- Possibility to integrate external sensors (e.g. ColorPlus)

- Easy calibration and maintenance, no tools required

AquaMaster is a compact measuring system for the following parameters: turbidity, pH, conductivity, Redox, dissolved oxygen and temperature. The various parameters can be combined individually. The colour touch screen of the AquaScat is the central control and display unit, as well as the connection to the host control system. Up to 8 measuring values can be transmitted. The measuring station is delivered completely pre-mounted. It requires only connecting the water inlet and water outlet. Connect – Adjust flow rate - Measure! Special attention was paid concerning maintenance. Holders and trays are integrated to leave both hands free for cleaning and calibration tasks.

Dimensions

approx. 55 x 115 x 40 cm (B x H x T)

Protection class

min. IP 54

Ambient temperature

0 .. +50 °C

Humidity

0 .. 100% rel. F.

Supply voltage

100 .. 240 VAC, 47 .. 63 Hz or
18 .. 30 VDC

Power input

max. 10 W

Outputs

4 x 0/4 .. 20 mA, galvanic separated
2 x Relays 250 VAC, 4 A
5 x digital outputs, free configurable

Inputs

1 x for optional flow meter
2 x 0/4 .. 20 mA
4 x digital outputs, free configurable

Display

1/4 VGA, 3.5"

Operation

Touchscreen

Interfaces

Ethernet, Modbus TCP, micro SD-Card

Options

Current output module, 4 x 0/4 .. 20 mA
Profibus DP
Modbus RTU

Sample pressure

max. 0.6 MPa (6 bar)

Sample temperature

0 .. +40 °C

Turbidity measurement

AquaScat, model selectable (see information for the corresponding instrument model)

Sensor type pH

Measuring principle: Potential measurement against reference

Measuring units: pH, Temperature [°C, K, °F]

Measuring range: pH 0 .. 14

Material in contact with medium: Glass, FPM (Viton), Electrolyte (Polisolve Plus), Reference (Everref-L)

Sensor type Conductivity

Measuring principle: 4-Pole Measurement

Measuring units: µS/cm, mS/cm, Temperature [°C, K, °F]

Measuring range: 1 .. 300'000 µS/cm

Accuracy: ± 3% @1 µS/cm .. 100 mS/cm, ± 5% @100 .. 300 mS/cm

Material in contact with medium: Stainless steel 1.4435/316L, Ra < 0.4 µm (N5), PEEK (FDA approved), EPDM (FDA approved)

Sensor type Dissolved Oxygen

Measuring principle: Optical (Luminescence)

Measuring units: µg/l, mg/l, ppm, ppb, %-sat, %-vol, Temperature [°C]

Measuring range:4 ppb .. 25 ppm

Accuracy (@25°C): 1±0.05 %-vol, 21±0.2 %-vol, 50±0.5 %-vol

Material in contact with medium: Stainless steel 1.4435/316L, Silicone (FDA approved), EPDM (FDA approved)

Sensor type Redox/ORP

Measuring principle: Potential measurement against reference

Measuring units: mV, Temperature [°C, K, °F]

Measuring range: -1500 .. 1500mV

Material in contact with medium: Glass, FPM (Viton), Platinum


For more information click on the pdf image above for full specifications, call KC Controls on 01293 538940 or send us an e-mail to sales@kccontrols.co.uk