For over half a century, ABB has developed, manufactured, supplied and installed analytical instruments for the process, environmental, steam and power industries.
Today, we provide the world’s best selection of measurement, monitoring and analytical solutions, backed by efficient and effective local support.
 

Positioner & Converters

ABB offers a versatile series of pneumatic and electropneumatic positioners, as well as being the leading supplier of I/P converters in the world today.

Electro-Pneumatic Positioners

The TZID family of smart electro magnetic positioners form the vital link between the control system and the valve. The TZID electro-pneumatic positioner from ABB incorporates auto-adjust to reduce commissioning time and an adaption program provides for optimal control of the position until set point is reached.
 

Download Specification Sheet .pdf

• Reliable concept, I/P conversion through the 500,000 times field-proven module known from TEIP 11 signal converters
• Influence of shock and vibration <1% with a load of up to 10 g and frequencies between 20 and 80 HZ
• Explosion protection certificate, CENELEC - FM - CSA, intrinsically safe
• Robust case suitable for field/outdoor mounting, IP 65
• Attachment to linear or rotary actutators in accordance with the standard
• Complies with the directives for EMC and CE conformity

Download Specification Sheet .pdf

Download Specification Sheet .pdf

Intelligent positioner

The TZID family of smart positioners form the vital link between the control system and the valve. The TZID incorporates auto-adjust to reduce commissioning time and an adaption program provides for optimal control of the position until set point is reached.

• Future-oriented design concept with HART protocol2s2>
• Selectable choice of characteristic curves<s2>
• Approved explosion protection enabling worldwide uses2>
• Meets the following regulations:
  ...EMC regulation 89/336/EWG as of May 1989 EC regulation for the CE conformity mark

Download Specification Sheet .pdf

Download Specification Sheet .pdf

The compact, intelligent positioner

The TZIDCrepresents the digital, intelligent positioner for communication via HART within the TZIDC positioner family. Unmatched shock and vibration immunity of 10g up to 80 Hz distinguishes the TZIDC from other‘s and guarantee reliable operation in almost all areas under harshest environmental conditions.

• Digital communication acc. to HART
• Easiest commissioning and operation on site due to local operation and auto adjustment
• Intrinsically safe (IS)
• Robust design and flexible in use with linear and rotary actuators

Download Specification Sheet .pdf

Digital communication via PROFIBUS PA

The TZIDC-110 represents the digital, intelligent positioner for communication via PROFIBUS PA within the TZIDC positioner family. Unmatched shock and vibration immunity of 10g up to 80 Hz distinguishes the TZIDC-110 from other‘s and guarantee reliable operation in almost all areas under harshest environmental conditions.

• Digital communication acc. to PROFIBUS-PA profile, version 3.0, class B
• FDT/DTM-technology serves for central configuration, documentation, diagnosis as well as Asset Management
• Easiest commissioning and operation on site due to local operation and auto adjustment
• Intrinsically safe (IS)
• Robust design and flexible in use with linear and rotary actuators

Download Specification Sheet .pdf

Digital communication via FOUNDATION Fieldbus

The TZIDC-120 represents the digital, intelligent positioner for communication via FOUNDATION Fieldbus within the TZIDC positioner family. Unmatched shock and vibration immunity of 10g up to 80 Hz distinguishes the TZIDC-120 from other‘s and guarantee reliable operation in almost all areas under harshest environmental conditions.

• Digital communication acc. to FOUNDATION Fieldbus Rev. 1.4
• FF device registration: IT campaign no. IT 016800, ITK-Ver. 4
• Easiest commissioning and operation on site due to local operation and auto adjustment
• Intrinsically safe (IS)
• Robust design and flexible in use with linear and rotary actuators

Download Specification Sheet .pdf

The New Member of the Exd / ExP Family

TZID-C200 serves for easy installation in hazardous areas for both the explosion proof housing as well as its capability of being adapted to all common valves with either linear or rotary movement

• Flameproof enclosure acc. to FM / CSA, EEx d (ATEX) andintrinsically safe (ATEX)
• Vibration immunity up to 10 g 20...80 Hz
• Autostroke function serves for perfect adaption to valve - fully automatic
• HART-Protocol as standard for full access to smart functions, diagnostics, maintenance and fault detection; also designed for fieldbus communication
• One positioner for linear and rotary actuators

Download Specification Sheet .pdf

Digital communication via PROFIBUS PA

The TZIDC-210 represents the digital, intelligent positioner for communication via PROFIBUS PA within the TZIDC positioner family. Unmatched shock and vibration immunity of 10g up to 80 Hz distinguishes the TZIDC-210 from other‘s and guarantee reliable operation in almost all areas under harshest environmental conditions.

• Digital communication acc. to PROFIBUS-PA profile, version 3.0, class B
• FDT/DTM-technology serves for central configuration, documentation, diagnosis as well as Asset Management
• Easiest commissioning and operation on site due to local operation and auto adjustment
• Various Ex-approvals (IS + explosion proof) for use in any environment
• Robust design and flexible in use with linear and rotary actuators

Download Specification Sheet .pdf

Digital communication via FOUNDATION Fieldbus

The TZIDC-220 represents the digital, intelligent positioner for communication via FOUNDATION Fieldbus within the TZIDC positioner family. Unmatched shock and vibration immunity of 10g up to 80 Hz distinguishes the TZIDC-220 from other‘s and guarantee reliable operation in almost all areas under harshest environmental conditions.

• Digital communication acc. to FOUNDATION Fieldbus Rev. 1.4
• FF device registration: IT campaign no. IT 016800, ITK-Ver. 4
• Easiest commissioning and operation on site due to local operation and auto adjustment
• Various Ex-approvals (IS + explosion proof) for use in any environment
• Robust design and flexible in use with linear and rotary actuators

Download Specification Sheet .pdf

Download Specification Sheet .pd

Download Specification Sheet .pdf

ABB Electropneumatic signal converters are the link between the control rooms and pneumatic actuators. The type TEIP 11 I/P Converter with various housings is available for cabinet installation, field installation, rail installation and as slide-in type. The signal conversion is based on standard signals. Current signals 0/4 ... 20 mA are converted to pressure signals 0.2...1 bar or 3...15 psi.

• Small dimensions; variable mounting position
• High immunity to shocks and vibrations with an effect < 1% for loads up to 10 g and frequencies between 20 and 80 Hz
• Wide temperature range, - 40°C (optionally – 55°C) … + 85 °C
• In compliance with European standard, EMC-guideline 89/336/EWG of May 1989, guideline for CE-conformity marking
• Various Ex-certificates, ATEX - FM - CSA, for intrinsically safe and Exd conditions